OptiCol™ Rat Collagen Type I (acid soluble), 100 mg

Code Description Price Qty
M18S Rat Collagen Type I (acid soluble), 100 mg £185.00
Kinetic Gel Stiffness
SDS-PAGE

Description

OptiCol™ Rat Type I Acid Soluble Collagen contains 100 mg at a concentration of approximately 4 mg/ml in a 0.02 M acetic acid solution (pH 2 to 3). Rat Tail collagen is soluble telo-collagen. Each product includes a bottle containing 100 mg of collagen solution accompanied with a bottle of pre-formulated neutralizing solution for the formation of a collagen gel.

Applications

3D Gels | Tissue engineering research | Wound healing constructs | Coatings | Solid free-form fabrications | Electrospinning | in-vitro research | Nerve Repair, Hemostats, Sealants, Coils, Sponges, Spheres/Beads, Ligaments, Strings, Tubes/Cylinders, Films
Product Details
Neutralization Solution 5 ml
Source Rat Tail Tendon
Gelation Time <60 mins
Fibril Formation 0.35 abs. units
Purity >99%
pH approx 2 - 3
Telo vs. Atelo Telo-collagen
Endotoxin Level ≤1.00 EU/ml as measured by kinetic LAL
Sterility No growth
Cell Attachment Assay Pass
Concentration 3.5 - 4.5 mg/ml
Gelation Curve Characteristic
SDS-PAGE

≥ 85% collagen contained within α, β, and γ bands; ≤ 15% collagen contained with bands traveling faster than α

Storage and Stability 4°C

Protocols

Coating Procedure

Note: Employ aseptic practices to maintain the sterility of the product throughout the preparation and handling of the collagen and other solutions.

1. Transfer desired volume of OptiCol™ collagen solution from the bottle to a dilution vessel if required. Further dilute to desired concentration using sterile 0.1% acetic acid solution. A typical working concentration may range from 10 to 100 μg/ml.

Note: Use these recommendations as guidelines to determine the optimal coating conditions for your culture system.

2. Add appropriate amount of diluted Rat Tail collagen to the culture surface.

3. Incubate at room temperature or 37°C, covered, for 1 - 2 hours.

4. After incubation, aspirate any remaining material.

5. Rinse coated surfaces carefully with sterile medium or PBS, avoid scratching surfaces.

6. Coated surfaces are ready for use. They may also be stored at 2 - 10°C damp or air dried if sterility is maintained.

3-D Gel Preparation Procedure

Procedure using the supplied Neutralization Solution

Note: Employ aseptic practices to maintain the sterility of the product throughout the preparation and handling of the collagen and other solutions

Note: It is recommended that the collagen and other working solutions be chilled and kept on ice during the preparation of the collagen.

1. Determine the desired volume of OptiCol™ collagen required.

2. Transfer 1 part of chilled neutralization solution into a sterile mixing vessel or tube.

3. Transfer 9 parts of the Rat Tail collagen into the sterile mixing vessel or tube for a total of 10 parts.

4. Gently agitate the mixture or pipet up and down to mix. Vortexing is not recommended.

5. Dispense the Rat Tail collagen mixture in the desired sterile plates or culture vessels.

6. Incubate at 37°C for 1 hour for gel formation.